draw ratio मीनिंग इन हिंदी

उदाहरण वाक्य

1. Draw ratios are typically around 3 to 4 in each direction.
2. In general, unaligned, unsubstituted PPV presents only moderate conductivity with doping, ranging from [ 1 ] Draw ratios of up to 10 are possible.
3. As the material deforms, all locations undergo approximately the same amount of strain as long as it hardens more than its cross-sectional area decreases, as shown at small draw ratios in the top diagram and at all draw ratios in the bottom.
4. As the material deforms, all locations undergo approximately the same amount of strain as long as it hardens more than its cross-sectional area decreases, as shown at small draw ratios in the top diagram and at all draw ratios in the bottom.
5. The plots at left show the quantitative relation between hardening ( depicted by the curve's slope ) and decrease in cross-sectional area ( assumed in the Consid�re treatment to vary inversely with draw ratio ) for a material that forms a stable neck ( top ) and a material that deforms homogeneously at all draw ratios ( bottom ).
6. The plots at left show the quantitative relation between hardening ( depicted by the curve's slope ) and decrease in cross-sectional area ( assumed in the Consid�re treatment to vary inversely with draw ratio ) for a material that forms a stable neck ( top ) and a material that deforms homogeneously at all draw ratios ( bottom ).